Notify me when the price drops
We will email you if we find a lower price on this product!
Product name: Jump Starter & Air Pump
Multi-function: Pressure gauge+air pump+ jump starter+lighting+power bank
4 preselect modes: CAR, MOTOCYCLE, BICYCLE, BASKETBALL
Output:QC3.0 18W
Charging time: About 6 hours
Storage Temp: -20~60℃
Working temperature: -20~45℃
Inflator Speed: Car tires up to 17 inch ~ 15minutes (from empty to full )
Number of tires: Pump up to 4 tires based on a full battery
Start Current: 600A
Peak Current: 1000A
Air pressure: 0-150 PSI(max)
Inflation efficiency: 20L/Min
Product Content: Main unit x 1, Packaging x 1, Car Battery Clip x1, USB Cable x 1, Inflator Tube x 1, Inflator Adaptors x 3
Quickly Jumpstart Vehicles
Low temperature -20℃
High temperature +60℃
Make sure the RED (+ POSITIVE) and BLACK (-NEGTIVE) are hooked up correctly. Connect the other cable connector to the jump start connection location. Turn the power on for the unit
Step 2Clip the jump start cable to the battery terminal. RED TO RED and BLACK TO BLACK. Make sure the clip is reasonable to secure and the target battery post is free of any rush and oxidation
Step 3After the clip green light is on, start your car immediately within 30 seconds. If fails, please take off the clip and try step 1 and step 2 again
Step 4Once you successfully start your car, please remove the clips ASAP to prevent damage to the unit
Air Pump Operating InstructionsStep 1Connect the air pipe, make sure that the air pipe and the air nozzle of the air pump are fully screwed down
Step 2The car tire and ensure that the air nozzle is completely aligned with the car tire inflation nozzle
Step 3Press the power switch of the air pump, select the car mode, preset the pressure and press OK to start automatic inflation, and it will stop when reaching the preset pressure
Jump Starter Air Compressor Detail